Web Hosting Php, Java Web Server - Php4, Php5 Programming Blog

Chapter number Property JavaScript JScript NES Notes agent 1.1 + 2.0 + - host 1.1 + 2.0 + - hostname 1.1 + 2.0 + - port 1.1 + 2.0 + - protocol 1.1 + 2.0 + - Method JavaScript JScript NES Notes lock() 1.1 + 2.0 + Warning unlock() 1.1 + 2.0 + - Cross-references: Wrox Instant JavaScript page 65 Wrox Instant JavaScript page 67 server.agent (Property) Describes the server being used. Availability: JavaScript 1.1 Netscape Enterprise Server version 2.0 Property/method value type: String primitive JavaScript syntax: NES server.agent The userAgent property of the navigator object in a web browser describes the kind of browser being used. This value is presented as a text string. This is the corresponding property in a web server and provides a way to deploy scripts that are shared amongst several variants of a server that are compatible but different. Navigator.userAgent See also: 1918
Note: If you are looking for cheap and reliable webhost to host and run your mysql application check Vision mysql hosting services

Error! No text of specified style in document. SendMail.To (Property) Defines the To: address for the e-mail. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.To This property contains the value that is transmitted in the To: header of the outgoing e-mail. The value assigned to this property should be a comma separated list of To: recipient e-mail addresses. These are the recipients of the e-mail and if you specify several, it may be more efficient as your SMTP server can bulk deliver several messages at once. server object (Object/NES) An object that represents the server in server-side JavaScript implementations. JavaScript 1.1 Availability: Netscape Enterprise Server version 2.0 JavaScript syntax: server NES Object properties: agent, host, hostname, port, protocol Object methods: lock(), unlock() This is a server-side host object representing the server. There is only one and you cannot instantiate it although you can make references to it. All users on the web server share this object. This is an object that allows you to share values across all sessions running in all applications across the entire server. The locking facilities permit you to lock resources while you are using them. Because this applies server-wide, there is even more reason to ensure you lock objects for the minimum of time and relinquish the locks as soon as possible. It is quite feasible to completely stall the whole server by locking a vital resource during the processing of a single client request. The effect of this is to make your server a single-threaded non-concurrent session server. That is, it will only actually serve one client request at a time. See also: Netscape Enterprise Server, project object, response.server, unwatch(), watch() 1917
Note: If you are looking for high quality webhost to host and run your jsp application check Vision jsp web hosting services

Chapter number SendMail.send() (Method) Sends the message encapsulated by this object. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 JavaScript syntax: NES mySendMail.send() This connects to the sendmailprocess in the server and dispatches the message. There is an implication here that because it uses sendmail, then the server can only run on platforms that support sendmail. That further implies the platform is a Unix system, although sendmail is open source and may be deployed on non-Unix platforms. If sendmail is not available the results of calling this method are uncertain. SendMail.Smtpserver (Property) Defines the name of the SMTP server to which we shall connect and request that our message be sent. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.Smptpserver You will need to consult your system administrator about this value. It is impossible to state with any certainty what value you should assign to this property there are so many possible ways to configure a mail server and deploy it. It may or may not be on the same machine as your web server. SendMail.Subject (Property) Defines the subject heading for the message. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.Subject This property contains the value that is transmitted in the Subject: header of the outgoing e-mail. The value assigned to this property should be a 7 bit ASCII string. 1916
Note: In case you are looking for affordable webhost to host and run your servlet application check Vision ecommerce web hosting services

Error! No text of specified style in document. SendMail.Organization (Property) A standard header to describe the organisation you belong to. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.Organization This property contains the value that is transmitted in the Organization: header of the outgoing e-mail. The value assigned to this property can be any 7 bit ASCII string. SendMail.prototype (Property) The prototype for the SendMail object that can be used to extend the interface for all SendMail objects. JavaScript 1.2 SendMail object Availability: Netscape Enterprise Server version 3.0 Property/method value type: NES SendMail.prototype JavaScript syntax: NES mySendMail.constructor.prototype Refer to: prototype property SendMail.ReplyTo (Property) The address to which replies should be sent. JavaScript 1.2 String primitive mySendMail.ReplyTo NES Availability: Netscape Enterprise Server version 3.0 Property/method value type: JavaScript syntax: This property contains the value that is transmitted in the ReplyTo: header of the outgoing e-mail. The value assigned to this property should be a comma separated list of ReplyTo: recipient e-mail addresses. Beware that many mail clients do not honor this field, they will attempt to send messages back to the ErrorsTo: or From: addresses or may even make one up. These header values are merely conventions and although they are described in various RFC documents, mail clients are written by people whose skills and attention to detail range from the plain careless to the highly professional. 1915
Note: If you are looking for cheap webhost to host and run your apache application check Vision jboss web hosting services

Chapter number SendMail.errorMessage() (Method) If there is an error, then you can obtain the message text with this method. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.errorMessage() Use this method after calling the send() method to retrieve any pending error message text. SendMail.ErrorsTo (Property) Defines the recipient of error e-mails if the message fails to arrive. JavaScript 1.2 String primitive mySendMail.ErrorsTo NES Availability: Netscape Enterprise Server version 3.0 Property/method value type: JavaScript syntax: This property contains the value that is transmitted in the ErrorsTo: header of the outgoing e-mail. The value assigned to this property should be a valid email address (or comma separated addresses). If the receiving mail system experiences any problems during the onwards delivery to the recipient’s mailbox (for example, if it doesn’t exist or is full), then a message is reflected back to the e-mail address in the ErrorsTo: header. SendMail.From (Property) Defines the From address of the e-mail. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.From This property contains the value that is transmitted in the From: header of the outgoing e-mail. The value assigned to this property should be a valid e-mail address. It is considered to be bad practice to forge From addresses in mail headers, and some mail systems will not allow you to do this and will override the settings you define for this value. Whatever value ends up in the From: header, the recipient can reply to this address if they mean to. It makes sense for this to be a mail address that a human being will ultimately check although you may want to put in some automation to read incoming e-mails if you expect a lot of responses. 1914
Note: If you are looking for best quality webspace to host and run your tomcat application check Vision virtual web hosting services

Error! No text of specified style in document. This property contains the value that is transmitted in the body of the outgoing e-mail. You can store any valid 7 bit ASCII text here. If you want to get really sneaky, you can construct a MIME type separator and embed some attachments or send a multi-part message. SendMail.Cc (Property) Defines a list of CC recipients. JavaScript 1.2 String primitive mySendMail.Cc NES Availability: Netscape Enterprise Server version 3.0 Property/method value type: JavaScript syntax: This property contains the value that is transmitted in the CC: header of the outgoing e-mail. The value assigned to this property should be a comma separated list of CC: recipient e-mail addresses. SendMail.constructor (Property) A constructor function for object instances. JavaScript 1.2 Function object NES mySendMail.constructor Availability: Netscape Enterprise Server version 3.0 Property/method value type: JavaScript syntax: The constructor is that of the built-in SendMail prototype object. You can use this as one way of creating mail dispatchers although it is more popular to use the new SendMail() technique. This property is useful if you have an object that you want to clone but you don’t know what sort of object it is. Simply access the constructor belonging to the object you have a reference to. SendMail.errorCode() (Method) Retrieves an error code value after attempting to transmit. JavaScript 1.2 Number primitive mySendMail.errorCode() NES Availability: Netscape Enterprise Server version 3.0 Property/method value type: JavaScript syntax: If the message sending failed, then you should be able to retrieve an error code value with this method. 1913
Note: If you are looking for cheap and reliable webhost to host and run your mysql application check Vision mysql hosting services

Chapter number Method JavaScript JScript NES Notes errorCode() 1.2 + 3.0 + - errorMessage() 1.2 + 3.0 + - send() 1.2 + 3.0 + - SendMail() (Constructor) A constructor for creating objects that encapsulate an outgoing e-mail message. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: SendMail object JavaScript syntax: NES new SendMail() Use this as an alternative method of constructing instances by cloning objects rather than instantiating fresh ones from the owning class. See also: Netscape Enterprise Server, SendMail object SendMail.Bcc (Property) Defines the list of blind copy recipients. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.Bcc This property contains the value that is transmitted in the BCC: header of the outgoing e-mail. The value assigned to this property should be a comma separated list of BCC: recipient e-mail addresses. SendMail.Body (Property) The body text for the e-mail message. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 Property/method value type: String primitive JavaScript syntax: NES mySendMail.Body 1912
Note: In case you are looking for affordable webhost to host and run your web application check Vision cheap hosting services

Error! No text of specified style in document. SendMail object (Object/NES) An object that encapsulates an outgoing e-mail message. Availability: JavaScript 1.2 Netscape Enterprise Server version 3.0 NES mySendMail = SendMail JavaScript syntax: NES mySendMail = new SendMail() Object properties: Bcc, Body, Cc, constructor, ErrorsTo, From, Organization, prototype, ReplyTo, Smtpserver, Subject, To Object methods: errorCode(), errorMessage(), send() This provides a way for the Netscape Enterprise Server to send e-mail messages as a result of a client request. You create a new message handling object with the SendMail() constructor. Then you define where it is going to be sent, its subject matter and content by storing string values in its various properties. Finally, you transmit the message via an SMTP server with the send() method. Example code: mySendMail = new SendMail(); mySendMail.Smtpserver = “mailhost”; mySendMail.To = “someone@somewhere.com”; mySendMail.From = “me@here.com”; mySendMail.Subject = “A test message”; mySendMail.Body = “Some body text”; mySendMail.send(); See also: Netscape Enterprise Server, SendMail(), unwatch(), watch() Property JavaScript JScript NES Notes Bcc 1.2 + 3.0 + - Body 1.2 + 3.0 + - Cc 1.2 + 3.0 + - constructor 1.2 + 3.0 + - ErrorsTo 1.2 + 3.0 + - From 1.2 + 3.0 + - Organization 1.2 + 3.0 + - prototype 1.2 + 3.0 + - ReplyTo 1.2 + 3.0 + - Smtpserver 1.2 + 3.0 + - Subject 1.2 + 3.0 + - To 1.2 + 3.0 + - 1911
Note: If you are looking for reliable webhost to maintain and run your java application check Vision java hosting services

Chapter number Property attributes: ReadOnly. Semantic event (Definition) An event that has been mapped to the DOM. See also: Error handler, Event propagation Semi-colon (;) (Delimiter) Semi-colon characters are used to mark the end of a statement. Availability: ECMAScript edition 2 JavaScript 1.0 JScript 1.0 Internet Explorer 3.02 Netscape 2.0 Netscape Enterprise Server version 2.0 Opera 3.0 JavaScript syntax: -aStatement; Argument list: aStatement A JavaScript statement Semi-colon characters are used to mark the end of a statement, separating one from another. JavaScript is somewhat forgiving and will place semi-colons into the script automatically as needed except in some rare cases. Refer to the discussion on Automatic Semi-colon Insertion for more details. Placing two semi-colons one after the other indicates a null statement. A line terminator can separate them and an optional comment is also permitted. See also: Automatic semi-colon insertion, Empty statement (;), Expression statement, Line terminator, Statement, var Cross-references: ECMA 262 edition 2 section 12.2 ECMA 262 edition 2 section 12.3 ECMA 262 edition 2 section 12.4 ECMA 262 edition 3 section 12.2 ECMA 262 edition 3 section 12.3 ECMA 262 edition 3 section 12.4 Wrox Instant JavaScript page 18 1910
Note: In case you are looking for affordable and reliable webhost to host and run your j2ee application check Vision web design programs services

Error! No text of specified style in document. SelectorArray.length (Property) A count of the number of rules in a style sheet. Availability: JScript 3.0 Internet Explorer 4.0 Property/method value type: Number primitive JavaScript syntax: IE myStyleSheet.rules.length Property attributes: ReadOnly. Refer to: Collection.length self (Property) An alias for the window.self property. JavaScript 1.0 JScript 1.0 Internet Explorer 3.02 Netscape 2.0 Opera 3.0 Window object -myWindow.self -self -top -window Availability: Property/method value type: JavaScript syntax: This property yields a reference to the current window in which a script is running. This means that the statement self.close() is effectively window.close(). This is another name for the window.windowproperty in this context. However, self is useful because you can build reusable scripts with it that can be used with a variety of object types and instances. Don’t forget that this can also refer to a Frameas well as a Window since they are both represented by the Window object. The self property can be used without the window prefix because it belongs to the global object in a web browser window. Using the selfkeyword makes no difference to the functionality of a script but it makes it easier to understand. For the same reason, you may want to use the window property in the same way. Frame object, UniversalBrowserAccess, UniversalBrowserWrite, Window object, Window.frame, Window.self See also: 1909
Note: If you are looking for cheap and reliable webhost to host and run your web application check Vision coldfusion web hosting services